产品中心-深圳市攀高测量技术有限公司

English

简体中文

产品中心

网站首页 ≡ 代理品牌 ≡ 美国LANRIN称重与测力传感器

STU信号变送器

信号变送器与仪表

市场价:0.00

价格:0.00

• User selectable analog output +/-10V, +/-5V, 0-10V, 0-5V, 0-20mA, 4-20 mA• 110 VAC, 220 VAC OR 18-24 VDC power • Switch selectable filtering 1 Hz to 5 kHz • Single channel powers up to 4 transducers • Selectable full scale input range 0.06 to 30 mV/V • Switch selectable offset +/-70% FS • Sealed ABS enclosure
SPD手持式仪表

信号变送器与仪表

市场价:0.00

价格:0.00

●Powered by 2 x AA internal batteries●Portable handheld precision instrument weighing only 250grams●Tactile keyboard, with dual range selection, peak/valley hold, gross/net and on/off controls●Microprocessor based, allowing single pass calibration facility●Dual range facility●Accepts an input range of up to 50mV/V●Environmentally sealed to IP65 / NEMA 4●7 digit LCD display, with battery, peak, trough, net, error and shunt cal indication1 year Warranty●Auto sleep
MTT-1000控制仪表

信号变送器与仪表

市场价:0.00

价格:0.00

The MTT-1000 have designed specifically to operate with strain gauge sensors such as Fast -measurement of Loadcell, Torquemeters, Pressure, Transducer,LVDT, etc,.* High resolution * High precision and stability * Quick sampling speed * UNIT CONVERSION : kg, N, lb, kg/cm2, bar, MPa * Display part and analogue zero by auto zero(DAC) * Relay output : Hi, Low, NG, OK. * Calibration of actual load and sensor output value * Peak & sample hold, Average hold * Analog Peak Hold * MTT-1000 : sampling speed : Appr. 1000Times Per Second
LST贴片式称重传感器

称重测力传感器

市场价:0.00

价格:0.00

Strain transducer is designed to measure strain in statically and dynamically loaded applications where high forces are to be measured such as roll stands, injection molding machines and cranes. This can be directly mounted on a flat surface with four bolts. Two oppositely mounted strain transducers should be used where bending effect need to be compensated.
AUMI拉压力传感器

称重测力传感器

市场价:0.00

价格:0.00

Miniature Compression & Tension Load CellsExtremely small and lightweightCapacity 100gf to 2tfAccuracy 0.03%Stainless steelEasy to Install
AUMT拉压力传感器

称重测力传感器

市场价:0.00

价格:0.00

Miniature Compression & Tension Load Cellsextremely small and lightweightCapacity 1kgf to 200kgfaccuracy 0.1%Stainless steel
LABS1&LABS2测力传感器

称重测力传感器

市场价:0.00

价格:0.00

The model LABS load button is a stainless steel subminiature strain gauge based transducer with compensated temperature performance. This type provides measurements up to 200 lb with better than ±0.5% (full scale) non-linearity.
LABM测力传感器

称重测力传感器

市场价:0.00

价格:0.00

LABM button load cells are strain gauge based transducers with temperature compensation and excellent overall performance. This type providesa range of capacities up to 150 kN or 30klb with better than ±0.5% (full scale) non-linearity. Three tapped holes are provided on the underside for ease of mounting. Fully welded cover, amplified and digitised versions are available on request.
LAX法兰测力传感器

称重测力传感器

市场价:0.00

价格:0.00

Press Force Load Cells are strain gauge based transducers for press-force monitoring. This type offers capacities up to 100 kN with compensated temperature performances. Cable is contained within a stainless steel spring for strain relief purposes for additional protection.
LIAC1拉压力传感器

称重测力传感器

市场价:0.00

价格:0.00

LIAC1 Sub-miniature Threaded In Line Load Cells are strain gauge based transducers designed for applications in general test and measurements.This type measures tensile and compressive loads up to 100N with better than± 0.5% non linearity.
LIAC2拉压力传感器

称重测力传感器

市场价:0.00

价格:0.00

LIAC2 Miniature Threaded In Line Load Cells are strain gauge based transducers with temperature compensation and excellent overall performance. This type measures tensile and compressive loads up to 5000N with better than ± 0.25% non-linearity.
LIAC3,LIAC4,LIAC5拉压力传感器

称重测力传感器

市场价:0.00

价格:0.00

These Miniature Threaded In Line Load Cells are strain gauge based transducers with temperature compensation and excellent overall performance. This type m easures tensile and compressive loads up to 50kN with better than ± 0.5% non- linearity.
LIAC6拉压力传感器

称重测力传感器

市场价:0.00

价格:0.00

Rod End load cell is a strain gauge based transducers with temperature compensation and excellent overall performance.This type measures tensile and compressive loads up to 10kN with better than ± 0.5% non-linearity.
LAW4-1测力传感器

称重测力传感器

市场价:0.00

价格:0.00

The model LAW4-1 is a stainless steel strain gauge based load cell with compensated temperature performance. This type is fully laser welded and provides measurements up to 20,000 lb with better than ± 0.5% (full scale) non-linearity.
LTA拉压力传感器

称重测力传感器

市场价:0.00

价格:0.00

The Miniature S-Beam Load Cell is a bi-directionalAluminumstrain gauge based transducer with high performance and built-intemperaturecompensation. This design providesbetter than ±0.1% (full scale) non-linearityand includes overloadprotection in both tension and compression directions.Options include IEEE1451.4 TEDS capability.
LTCB测力传感器

称重测力传感器

市场价:0.00

价格:0.00

Model LTCB is a threaded load button for tension and compression load measurements up to 5000 kg. Fully welded cover,amplified and digitised versions are available on request. High strength steel construction and options like welded cover enables this model to be used in harsh environments. We can also customise this sensor for other thread sizes and cable sizes.
LAW测力传感器

称重测力传感器

市场价:0.00

价格:0.00

The model LAW is a stainless steel subminiature strain gauge based transducer with compensated temperature performance.This type provides measurements up to 20000lbf with better than ±0.5% (full scale) non-linearity.
LPT测力传感器

称重测力传感器

市场价:0.00

价格:0.00

The Low Profile Tension and Compression Load Cell is a bi-directional Aluminum strain gauge based transducer with high performance and built-in temperature compensation. This design provides better than ± 0.1% (full scale) nonlinearity.Options include IEEE1451.4 TEDS capability.